reverse light connection

wickedq400 · 02-03-2010, 10:40 PM

Hi Trying to hookup reverse lights on LH Torana with aussie 4 speed.There's 2 wires comiing out the firewall but only one terminal on the gearbox.Wiring diagram in manual also shows 2 wires.
What gives?
Mick

switched on · 03-03-2010, 11:52 AM

the reverse light switch is on top of the box next to the shifter linkage. there should be 2 terminals if not, its likely one has been broken off
cheers james

wickedq400 · 04-03-2010, 09:16 PM

Thanks for the quick reply.I was looking at a switch on the right side of the gearbox with only one terminal but now I see the switch I need to connect.Just a pain to get to.
Thanks again
Mick

02-03-2010, 10:40 PM	#1 (permalink)
wickedq400 Clutch Popper Join Date: Mar 2009 Location: Warrnambool Vic Ride: HQ Monaro View My Photo Gallery Posts: 81	reverse light connection Hi Trying to hookup reverse lights on LH Torana with aussie 4 speed.There's 2 wires comiing out the firewall but only one terminal on the gearbox.Wiring diagram in manual also shows 2 wires. What gives? Mick

03-03-2010, 11:52 AM	#2 (permalink)
switched on Wannbe Racer Join Date: Dec 2006 Location: MELBOURNE Ride: LX HATCHBACK TORANA View My Photo Gallery Posts: 672	the reverse light switch is on top of the box next to the shifter linkage. there should be 2 terminals if not, its likely one has been broken off cheers james __________________ switched on auto electrics 0407311946 adicted performance. 0397086232 www.fryzem.com.au

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-03-2010, 09:16 PM	#3 (permalink)
wickedq400 Clutch Popper Join Date: Mar 2009 Location: Warrnambool Vic Ride: HQ Monaro View My Photo Gallery Posts: 81	Thanks for the quick reply.I was looking at a switch on the right side of the gearbox with only one terminal but now I see the switch I need to connect.Just a pain to get to. Thanks again Mick